#25505
FIXED MOUNT
 |
The Fixed Mount assembly can be welded to your mounting
point. It will provides a simple attachment point for your JounceShock.
The Fixed Mount will most often be used with the the Domed Foot on
the shaft end of the shock (part #25602.)
Click here for more dimensional and technical data.
|
#25501
15 degree FLEX MOUNT
|
The 15° Flex Mount assembly can be welded to your mounting
point. It will give you 7.5° of articulation in any direction during
compression and center the JounceShock during rebound. The 15° Flex
Mount will most often be used with the the cupped foot and target
on the shaft end of the shock (part #25601.)
Click here for more dimensional and technical data.
|
#25530
FRAME SIDE MOUNT
|
The Frame Side Mount provides a versatile weld or bolt on
option to mount your JounceShock in a fixed position.
Click here for more dimensional and technical data.
|
#25508
COIL CARRIER/ BOLT UP MOUNT
|
The Coil Carrier / Bolt Up Mount can be sandwiched in your
spring seat or bolted to the bottom of a frame. This is the mount
you need if you are using JounceShock with LG Coilovers.
Click here for more dimensional and technical data.
|
