The Domed foot screws directly into the shaft of the JounceShock. This is the most traditional of bump shock ends and is most often used in an application with some scrub on a solid target. It can also be used in conjunction with the Shaft Extender #25603 below,
Click here for more dimensional and technical data.
The Cupped Foot and Domed target is a bolt on target for the shaft end of the JounceShock. It will target the JounceShock for 30° of motion as your suspension travels.
Click here for more dimensional and technical data.
#25603
1 - 7 inch Static JounceShock Extender
(Fixed Length to add 1" up to 4" of length to the bottom of your
Jounceshock)
#25609
3 - 6 inch Sliding JounceShock Extender (Sliding unit will slide
up and down from a fixed upper and lower contact point - will slide from 3"
to
6"
The JounceShock Extenders are length adapters that will inches to
the shaft of your JounceShock. This will permit you to finely control
when your JounceShock comes into contact
as well as offer a thinner tube to stab at a target (sold separately). Click
here for more dimensional and technical data.
